Follow the below steps when fitting your TV bracket
1. Remove your TV bracket from the box and make sure all parts are present
2. Use a stud/cable/pipe finder to make sure there is nothing underneath the wall surface or to find the stud if you have a stud wall
3. Offer the bracket up to the wall and mark the hole positions using a pencil, tape measure and spirit level
4. If you have a brick wall, drill the holes using the power drill and masonry bit. If you have a stud wall use the wood bit to drill pilot holes for the screws
5. Fit wall plugs into the drilled holes if you have brick walls
6. Screw the bracket to the wall using the right screws. If you have a large heavy TV you will need to use heavy duty screws
7. Check the TV bracket is securely fitted to the wall
8. Ask someone to help as you fit the TV to the TV bracket
All you have to do now is plug the TV in and enjoy!
